magnetic spool holder 230316
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal Spool Holder for enclosures made from steel.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
TL;DR
Two part, click fit, magnetic spool holder
Collection
update 2023.0317
- magnets used 40x20x5 mm
Motivation
Needed one with an 90° angle.
The previous, single piece print in place one had some issues with tiny very tight small sampler spools.
https://www.printables.com/model/285481-rack-enclosure-cheaper-and-stronger-than-everythin
This spools are so light weight that they got pulled over the 45° at the hooks end.
Let's get started
Just slice and print or if mk3 user with 0.6 mm nozzle use the gcode
Attribution
Can I sell copies of this?
Yes! Yahbluez shared this project under the GNU GPL v3.0 license. This license allows selling copies, but you must provide proper attribution and use the GPL 3.0 license, as detailed in the GPL v3.0 license itself. You have not the right to use any other licence than GNU GPL 3.0.
Donation
If you like to donate you can buy me a coffee
Filament used
PETG Jet Black