Replica Tec 9 Frame scale model with foregrip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Please leave a comment if you find the ergonomics of the foregrip too cramped - I'll make an improved version.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 434
- Wydruki
- 0
- Wyświetlenia
- 2449
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
Replica Tec 9 Frame scale model with foregrip by saxonite - Thingiverse
Please leave like if you download this model, it goes a long way in motivating me to continue making polymer furniture & replicas, I appreciate it!
Please leave a comment if you find the ergonomics of the foregrip too cramped - I'll make an improved version - This current model is designed to go no further forward than the end of the barrel.
This should fit most airsoft tec 9 replicas & deactivated examples alike, with minimal if any alterations needed
Note: This model may be Mirrored depending on your settings
I highly recommend having an assortment of drill bits available to ensure proper fitment.
This lower should fit all replica Tec 9 parts
WARNING!!:
THIS IS AN EDUCATIONAL REPLICA THAT SHOULD BE CONSTRUCTED IN PLASTIC - ANY ATTEMPT TO ALTER WITH THE INTENTION FOR USE WITH BLANK OR LIVE AMMUNITION MAY LIKELY RESULT IN INJURY, LOSS OF LIMB & PROSECUTION DEPENDING UPON YOUR LOCAL LAWS - ANY OF THESE EVENTS WILL BE YOUR OWN RESPONSIBLILITY.
Print Settings
Resolution:
<=0.12mm
Infill:
100%
Filament: Generic ABS, Nylon or PLA
Notes:
This can be printed in go on an ender 3 if printed in the shown orientation
Post-Printing =============
This can be printed in go on an ender 3 if printed in the shown orientation
Category: Scans & Replicas