Remix Y-Splitter v2_M10x1_PushFit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remake of version 2 (with mounting hole) of the Y-Splitter remake of Brandon Raineri with PushFits M10x1mm
- Ocena
- 4,474 / 5
- Polubienia
- 104
- Pobrania
- 1027
- Wydruki
- 20
- Wyświetlenia
- 3631
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
With the help of the Fusion360-file of the version2 (with mounting hole) of the Y-Splitter remake of Brandon Raineri, I have adapted a version with M10y1mm PushFits, since the recommended McMaster-Carr part is hard to get in Europe.
I use an M3/20mm Screw and a random rubber-sealing ring as a spacer to attach it to the BambuLabs enclosure.
I have printed :
ABS (Sunlu ABD black)
0.4mm nozzle
0.08mm layer height (0.2 first layer)
6 wall loops (external perimeters)
with 5mm brim, without supports
I would be interested, if anyone experiences wear-off after running abrasive filament through the splitter and after how many meters of filament approximately.