Battery Storage/Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery storage and organizer for AA, AAA, CR20, and 9V.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 133
- Wydruki
- 1
- Wyświetlenia
- 821
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple battery holder for 10 9v, 16 AA, 12 AA, and 6 CR20 batteries. If there is any interest in a different configuration, let me know and I'll see what I can do.
I used Amazon basics AA, AAA, and 9V as well as a standard CR2032 as a reference for the slots. I also added 1mm of space for each battery type to be on the safe side and it turned out great in my opinion. All batteries fit with a little bit of wiggle room. The CR20 slots have a bit more space on my print than I was expecting, but nothing too crazy. I did not upload an image of my print as what I printed was more of a prototype, but the dimension of the battery slots did not change, so I am 100% confident that this will fit your batteries with no issues.
PLA with a 0.2mm layer height, 4 walls, and 20% infill worked well.