Spool-holder Ultra Smooth no Bearings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lot of spool holders out their and some require screws and even are quite noisy this will solve those problems.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 677
- Wydruki
- 4
- Wyświetlenia
- 2691
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
ULTRA-SMOOTH RUNNING SPOOL HOLDERS
Notice: not my work (scroll down)
I tried LOTS of spool holders here, but most of them either required screws, bearings or whatever. Most of them were also quite noisy so I found this one on Thingiverese and wanted to share it with printables.
These simple and easy-to-print spool holders do not require any screws, nor bearings but run WAY smoother than any spool holder with bearings I discovered here. Why is that? Because there is a minimum of friction between each wheel and it's stand.
Printing settings
Layer height: 0.15
Infill: 15%
For one spool you need:
4x Wheels
4x Stands
2x Rails
All parts are self-explanatory and easy to figure out. It is kept as simple as it could be. Zen style. No screws, no bearings, no fancy stuff. Runs ultra smooth and quiet.
All parts are very easy to print, no supports required. For the wheels, use a drop of super glue to fix the seconds spike to the wheel.
Tested and works well with spools up to 1kg. Would carry even more.