1 / 3
V1E LowRider 3 - Mid Belt Y Tensioner Block — zdjęcie 1
1 / 3

V1E LowRider 3 - Mid Belt Y Tensioner Block

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Enables fast swapping of LR3 between different sizes tables, e.g. big 4'x8' and smaller table, e.g. 2'x4'

Ocena
5 / 5
Polubienia
10
Pobrania
52
Wydruki
2
Wyświetlenia
721
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Mod has top-bottom split Y tensioner blocks enabling clamping to middle of the belt.  So, the original Y tensioner block can always remain attached towards end of the belt.  Meanwhile the mid belt tensioner can be quickly added and removed.  I use wing nuts on my Mid Belt tensioner, ensure your your wiring isn't loose and snags on wing nutes if you decide to use them too.
 

Included both bottom and top models here, but I'm only using the bottom part in my build (see my Make pic(s)).  Am using M5 30mm bolt with M5 wing nuts (see pic below).  My print is tight enough to not need the top part, or wing nut even.  Early days still, so maybe the PLA will loosen up over time since my LR3 lives in an unconditioned space exposed to hot-cold weather cycles.  Will mount top part if/when I experience belt slipping out from the bottom part.


Existing Official V1E quick release tensioner block design is great.  This block is only useful for folks wanting to mount their LR3 to different sized tables/surfaces.

  • .3mf contains all 4 parts oriented ready for printing.
  • .STL files contain each part.  Am only using bottom parts current, see my make pic.
  • Included Step/Fusion files incase you want to remix/mod further.

See Also:

 

Tagi