Simple Spool Divider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalistic spool divider - Different sizes - Based on an idea by Jure
- Ocena
- 4,833 / 5
- Polubienia
- 49
- Pobrania
- 141
- Wydruki
- 6
- Wyświetlenia
- 720
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Minimalistic spool divider
Based on an idea by Jure
Handy for sample filaments, to free up your filament storage of almost empty spools, or other uses.
Feel free to modify/scale/cut it for different spool sizes. F3d included.
Update
- Added variations for different roll sizes.
Sizes
Below are the actual sizes of the dividers. Measure your inner spool width.
You can scale them in the slicer on the X axis to fit other dimensions.
69mm wide - 4 divisions
57mm wide - 3 divisions
47mm wide - 2 divisions
-Any filament
-0.25 mm first layer height (for the tabs)
-3 perimeters
-20% infill (Gyroid)
Assembly
Print 3 or 4 pieces.
Bend the tabs so they lay flat. Glue them with superglue onto the spool.
Alternative: wrap a couple of zip ties around
Enjoy!