1 / 1
Mintion Beagle Camera Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix from Kim3043's Beagle Camera Bracket on thingiverse.
After printing, I found the clips would not fit my Ender 3 v2 Neo. I ended up breaking off the tabs and drilling holes to get mine to work.
This remix I removed the tabs and inserted holes to fit screws and T-nuts into the grooves. I have not printed this, but it should work much better than the way I did it originally.
Printed on it's back with supports only for the tabs holding the camera.
I used 3mm screws with 3mm T-Nuts.