Wall Mount for WD elements 3 1/2 inch external hard drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall Mount for WD elements 3 1/2 inch external hard drive with screw holes for fixing
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 101
- Wydruki
- 1
- Wyświetlenia
- 615
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A designed wall mount for WD elements 3 1/2 inch external hard drive. I thought i'd share my design despite it being simple and primitive as I couldn't find an appropriate wall mount design out there. Designed to fit snug and inserted from the top with cables from the bottom, but could be rotated and used upright if you prefer - just secure the opening with tape or something so the drive has no way of vibrating free and falling out (just to be sure). You will need to peel off the rubber feet or increase the width by the thickness of the rubber feet in the slicer before printing.
I printed in ABS with tree supports (less wasted material vs standard support structure) but I am sure PLA+ or PETG would work fine too.