OrangePi Zero LTS Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimal Case for OrangePi Zero LTS
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is a little case I designed for an OrangePi Zero LTS
I brought one to setup as a “PiHole” DNS Sinkhole for my home network to stop pesky website tracking and Ads. But of course you could use it for whatever you want!
After following this guide - How to Setup PiHole on the OrangePi Zero I was in need of a case to keep it safe and free from dust.
This case comes in 2 main flavours “With the Ethernet port available” and “Without the Ethernet port available”, I also made a second version of each “flavour” with a slightly bigger cut-out for the USB port in case you have a chunky cable.
The top section also has ventilation holes to stop it getting too hot (but I would still advise using little heatsinks on the main chips)
After printing assembly is simple and requires just 4 M3x4 hex bolts.