Ornithopter Mech Revised
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got inspired from the original design, changed some things to better fit my situation and get this new printer dialed in
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 467
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
Changed some things from the original (which operated as it should) to better suit my situation
All parts scaled down to 75% of original model
.2res .4mm nozzle
10% infill for all except Gear Handle and Gear Drill Attach (100%)
Supports on Wing 2
Pins were designed for press fit (I also used CA glue for security)
Gear Plate Pins are secured with CA glue, as well as the Grip underneath the model.
Gear Plate Pins should be turned to about 10 o'clock and 2 o'clock to ensure Wings don't slide through.
Theres a file for a manual hand crank(Gear Handle) and a file for a drill attachment (If you really wanna turn things up a notch.)
Overall, being new to the 3d printing world, this was a great project to get this new printer dialed in and very inspiring.