Z42 Mini Drip Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When I started using my resin printers, the need for a drip tray was evident, so here it is.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 752
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When I started using my resin printers, the need for a drip tray was evident, so here it is.
By using the modifiers feature in Prusa Slicer it couldn't be easier to model these items in CAD and then use those modifiers to put perimeters and top and bottom layers where they are needed and leave the rest open infill to create the mesh for the drip tray.
Print instructions
The drip trays are designed to fit the Prusa Mini print bed, but can be printed on any printer that you have set up in Prusa slicer by using the 3mf files.
Use the 3mf and everything will be set up, with all the modifiers in place all you will need to do is be sure that your filament is set for the material you will be using, by default most of my designs are set for Prusament PLA.
Gcode files are included for those that want them, they are also set up for Prusament.
Stl files are included as well, but I'm not going to try to type out how to set up the modifiers to get the desired effect. I will have a video out on how to set them up soon.
I will soon have a similar model up that takes advantage of the full bed of the Prusa MK3s.