1 / 6
SIGN OF THE HORNS TROPHY VERSION — zdjęcie 1
1 / 6

SIGN OF THE HORNS TROPHY VERSION

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

1,26 € – 1,54 € netto (bez VAT)

Dla pliku: sign_of_the_horns_plinth-V2-MOST ROCKING_0.6n_0.2mm_PLA_MK3S_1h14m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,40 € netto (środek widełek).

Masa podana przez autora
21 g
Czas druku podany przez autora
1,23 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Like the sign of the horns but a trophy, customise with your own text.

Ocena
5 / 5
Polubienia
60
Pobrania
334
Wydruki
3
Wyświetlenia
1420
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Attribution

ADD YOUR OWN TEXT TO THE PLINTH, MAKE  A ROCKING TROPHY

Based on my classic  sign of the horns on a plinth, rewritten so you can make a trophy with your own text

Original sign of the horns (http://www.thingiverse.com/thing:9541) by Isaac Dietz

Instructions

V2.2 - now square base option - should be easier to add text in prusa slicer

V2.1 - text can now be embossed or debossed 

if you want no text use “” in the m_text variable  

You will need to use openSCAD to generate your model - https://openscad.org/

Heres  a good video introducing openSCAD https://www.youtube.com/watch?v=cBesMfP7Ddo

To generate the text it uses write.scad by HarlanDMii, this needs to be in the same folder as this models SCAD file, or better yet paste it to your openSCAD libraries folder instead.

The The_Horns_fixed.stl is required in the same folder as the SCAD file, you could substitute your own .stl file if you want, some scaling and translation will be required.

Added original Horns Model to save you a little time.

Use a colour change to differentiate the horns from the plinth.

Example models

  • With embossed text
  • With debossed text
  • With no text - add your own in Prusa Slicer

Tagi