GoPro Floaty
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This device keeps your GoPro floating.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 821
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
The model consists of two parts, the floating handle and the GoPro mount (I also included a file where the mount is fixed to the handle). The floating handle has 4 chambers which help with stability and redundancy, if one chamber gets damaged. it gets about 50% submerged when a gopro is attached.
You might print the handle in a somewhat bright color for better visibility. You can glue the mount to the handle, but using threadet inserts and screws (M2) is highly recommended. Also you have to glue a hex-nut to the mount, so you can use standard GoPro screws to secure your camera. I used the two files so i can change the mount if it gets damaged without printing a new handle.
I printed both the handle and the mount in PLA. Print the handle standing upright without supports.
- Material: PLA
- Nozzzle: 0,4 mm
- Layer-Height: 0,2 mm
- Support: no