Spulenbox Prusament stackable version upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple upgrade of the Spulenbox Prusament to make it stackable
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 213
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Starting from the Spulenbox Prusament model made by sonof91 I created a simple interface by joining 2 original rings to make it stackable
For 2 hubs you'll need 1 interface, for 3 hubs 2, etc… You'll also needs the top and the bottom original parts
A simple and chip way to upcycle your spool hubs
For printing, supports are need just for the inner bottom ring
I printed mine with 0.6mm nozzle and 0.20mm layer height. Other parameters are default PrusaSlicer ones
As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post also nice pictures of your makes
Enjoy
If you like this model, take a look also at my other designs