2kg Spool Holder (Prusament recycled PETG/PLA)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool Holder that perfectly fits (and holds) Prusament 2kg spools and anything thats lighter and narrower
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is actually the first thing I printed in Prusament recycled PETG, still using a broomstick as Spoolholder as the filament spool did not fit my original creality spoolholder. It holds up nicely for 2 months now so I am confidently sharing it.
Note: there are two model files, I used the thin back plate and reinforced it by gluing a thin wood plate on the back as it saves quite some material.
I sanded it down to reduce friction and it works fine.
No suports needed, internals structure is designed to hold the load.
Its fixed with up to 6 M4 Bolts.
Dont mind my messy filament guide into the enclosure.