Instant Pot Air Fryer Rack Removal Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Instant Pot Air Fryer Lid includes a rack to add a second level for frying.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 140
- Wydruki
- 3
- Wyświetlenia
- 2000
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Instant Pot Air Fryer Lid includes a rack to add a second level for frying. Halfway through cooking, the lid tells you to rotate the food. Because the rack is very hot, moving it is extremely difficult. This tool lets you grab the rack easily, and you're not stuck using a fork or spoon handle.
To use it, simply squeeze the top handles. The claw will open, and you can insert it into the two openings in the rack. Releasing the handles will close the claw, allowing it to be used as a handle.
While using it, avoid touching the food with the tool. If it starts to look nasty, throw it out and just print another!
IMPORTANT: Do not leave the tool in the fryer while cooking. It will melt and make a nasty mess.
Print instructions
Printed in PLA at 0.2mm layer height and a 75% infill. If the tool is too hard to open, reduce the infill. Anything over 50% seems to work great.