Crutch Caddy (cup and phone holder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wife needed something to hold phone and water bottle while getting around the house on crutches.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 212
- Wydruki
- 1
- Wyświetlenia
- 1089
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My wife has been on crutches for a lot longer than we were planing. I finally got around to designing a decent cup/phone holder that secures inside the crutch so that she can get herself water and be a little more independent.
Designed with no supports or hardware. Print in whatever you think is pretty and strong enough. I did these in PLA Silk Pink (wife's choice of filament). This design should be very strong and not use too much plastic.
I have included the step files in case anyone needs to remix.
You will need to take the top part of your crutches off to slide this part down the main fork. Then reassemble the crutches.
If you have a set of crutches that are riveted on top and bottom and cannot separate in the middle, this initial design won't work. I'll try modifying the tube holes to be more of a c clip to accommodate those kind of crutches.