DIY Guitar Pedalboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A DIY guitar pedal board made of acrylic plates and plastic brackets. Split into 2 interlocking halves for transport.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 1916
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
A fully DIY pedalboard made of laser cut acrylic top and bottom plates and printed brackets. The board is split into interlocking halves to make transport easy.
Power cable passthroughs are integrated into the design (designed around 10mm max diameter cables), and contains smaller slots for cables to rest in.
You can easily glue the acrylic to the brackets - make sure the slot cutout is parallel to the ground. The plates are slightly different sizes to line up with the bracket. Use whatever method you'd like to attach your pedals to the acrylic.
Mount an LED strip between the plates for even better vibes.
The DXF files are not perfect, you will have to clean them up in Illustrator/Inkscape because Fusion did not want to cooperate with exporting them. Tolerances should be tightened from their existing values.