Adventure Force Spectrum Half-Dart Pusher

Half-Dart pusher for the AF Spectrum. Currently requires trimming of the area that holds the kill switch when the jam door is opened to operate. (See picture with red circle)

This is compatible only with the Half-Dart adapter from the Nexus Pro or Aeon Pro.

Works with the AF Pro Half mags and Talon mags.

Printed on a Prusa I3 MK3S. 15% infill and supports on build plate only.

There's a gap in the tip of the pusher above the dart (see photo with yellow circle) which sits in the rail to keep it there. May need some sanding to clean the supports out.

This is the 4th iteration of my design but first one made available on PrusaPrinters. May need further refinement.

Print instructions

Unassociated tags: Talon Mag

Category: Mechanical Toys Summary

Half-Dart pusher for the AF Spectrum. Currently requires trimming of the area that holds the kill switch when the jam door is opened to operate. (See picture with red circle)

This is compatible only with the Half-Dart adapter from the Nexus Pro or Aeon Pro.

Works with the AF Pro Half mags and Talon mags.

Printed on a Prusa I3 MK3S. 15% infill and supports on build plate only.

There's a gap in the tip of the pusher above the dart (see photo with yellow circle) which sits in the rail to keep it there. May need some sanding to clean the supports out.

This is the 4th iteration of my design but first one made available on Thingiverse. May need further refinement.

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: Doesn't Matter

Supports: Yes

Resolution: 0.2

Infill: 15%

Filament: Generic PLA Black Post-Printing

This part requires trimming so the pusher doesn't get caught when moving back

Gap in the front rides on the rail. May need cleaning of supports with file.