Permanent electrical cable grip (parametrized)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple (parametrized) contraption to permanently secure cables coming out of a box. No supports, no hinges.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I had cables of different diameters coming out of an electronics box that needed securing and this is the simplest solution I could think of.
You can easily customize it to fit your needs. The Fusion 360 model is parametrized:
- each cable diameter (there are three)
- the size of the slit between the “jaws” (I used 1mm and it worked well enough)
- the size of the screw that fixes the bracket to a box and screw head (for countersinking)
- thickness of all the parts, if you are worried about their strength
- the length of the jaws is controlled by the
box_hole_diameter– if you take a look at the picture showing the grip in real life you will know what it means :)
I am also including a 3mf project file (Prusa Mini) in case your situation is similar to mine, so you can print a copy of what I made. The parameters for this print are the same you can see on the Fusion 360 screenshot.
I'm releasing it as a public domain model. You can do whatever you want with it :)