Ender 3 Max - Custom LCD Front Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom LCD Front cover for the Ender 3 Max
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 575
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This was designed specifically for use with this Octopi Station: https://www.thingiverse.com/thing:5819300
If you don't intend to use the case, you may need to add some reinforcement to the model as it won't last long on its own
If you have trouble getting the knob to click down (I did) it can be easily fixed by putting a small piece of paper or something in there as a spacer. Also, it is recommended you block supports on the screw holes as they are only needed on the bottom unsupported side as shown in the pictures.
Works with the original provided screws or m2*6-8 bolts
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 Max
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
80%
Filament: Hatchbox PLA Black
Notes:
Sliced with PrusaSlicer-2.5.0