Trophy - FreeCAD exercise 230318
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Playing with organic shapes in freecad
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 349
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- GNU General Public License v3.0
TL;DR
Freecad exercise learning by doing, copy the model with your favoured CAD programm.
Collection
Motivation
Saw a similar model in the contest #62 and wonder how to do that in freecad with a lesser amount of data. (257 MB vs 1 MB) I guess there are faster ways than the way i used.
Let's get started
Try it by yourself and compare your solution with mine. I added the freecad file.
I used b-spline for “organic” and helix them up.
If you set the helix pitch to a value higher than 50% of the height it should be always printable with FDM printers no matter how fancy it looks.
This model needs support only for the bottom of the sphere and the overhang.
Attribution
Can I sell copies of this?
Yes! Yahbluez shared this project under the GNU GPL v3.0 license. This license allows selling copies, but you must provide proper attribution and use the GPL 3.0 license, as detailed in the GPL v3.0 license itself. You have not the right to use any other licence than GNU GPL 3.0.
Donation
If you like to donate you can buy me a coffee