Enclosure mount for 120x120mm fan and filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount for a 120x120mm computer fan and filter for a 3D printer enclosure
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
There are plenty of enclosure fan/filter mounts out there, but I couldn't find exactly what I was looking for - maybe this will suit someone else's needs too!
The body of the mount is fixed to the enclosure (in my case, a plywood box) using #6 screws, and the fan is bolted in place using M3 bolts and nuts. The cover fits snugly on the inside of the enclosure, but there's a spot for an M3 bolt if you want to fasten it down.
Prints easily without supports so long as the flat rectangular surface is on the build plate.
