1 / 2
Wingspan Bird Feeder Dice Tower (Laser Cut)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wooden replacement bird feeder (dice tower) for the Wingspan board game. Remixed from sgreasby on Thingiverse.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 691
- Wydruki
- 3
- Wyświetlenia
- 3718
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 7)Remiksy (0)Kolekcje (57)Powiązane
This is a wooden replacement bird feeder (dice tower) for the Wingspan board game. The tower and lifts off of and lays inside the dice tray for storage.
There are 2 versions, one without the logo (pictured) and one with a more detailed logo.
Equipment & Supplies
- Glowforge Plus
- ⅛ in MDF from GS2 Awards
- Transfer tape for masking MDF
- Wood glue
Modifications
Compared to sgreasby on Thingiverse, I made the following adjustments using Inkscape.
- Recolored lines and roof images for easier engraving on Glowforge
- Removed clips on roof images, cropped, and re-inserted cropped images (Glowforge doesn't support clipping in svg)
- Increased the tolerance on the joints since pieces were originally too tight a fit using my laser
- Replaced the logo with a more detailed one, though I ended up liking it better without the logo at all
- Split the side walls of the tray to add a gap for the tower roof so the tower could lay inside the tray
- Extended the length and width of the tray a few mm to better fit the tower (upright and laying down)
- Increased the height of the opening from the tower into the tray (dice were getting stuck sometimes)
Glowforge Settings
- Material preset: “Medium Draftboard”
- Roof panels: “3D Engrave”
- Blue lines: “HD Graphic” engrave
- Cut lines: Changed “Proofgrade Cut” from 168/Full to custom 155/Full