replacement-base for plunge base of Katsu routers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for the original base of the plunge base of Katsu routers
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 456
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a replacement for the original gliding base of the plunge base of Katsu routers.
It may fit other plunge bases of similar routers (Makita, Anesty, Vevo...), but I can't tell.
While making a circle-cutting jig, I took the chance to make a replacement for the original base. I made the countersunk holes a bit deeper, as I found that the head of DIN screws is a bit wider than the original M4 ones.
You can find the circle-cutting jig here: https://www.printables.com/model/426937-circle-cutting-jig-for-plunge-base-of-katsu-router
I also attached the general measurements of the plunge base in case you need them for your own projects.