Neutral Dude easier printing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Split the base of Neutral Dude form the body to make printing him a lot easier.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 164
- Wydruki
- 3
- Wyświetlenia
- 753
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original model would require a lot of support, which would lead to worse surface quality.
Using Prusa Slicer 2.6.0 (alpha 5), I split the base of the Neutral Dude from his body, and made them connectable via plugs.
This way the only support would be for the eyes and inside the body.
Files have already been oriented in the most optimal printing orientation for minimized supports and improved surface quality.
Important
Because the model was split using prusa slicer 2.6.0 new split feature, using the 3MF file will require you to also use prusa slicer 2.6.0.
The stl-file for the body does not have the holes for the pegs on the base, as it doesn't get exported due to it being a feature, so you will need to add the holes yourself (stl file note has dimensions).
The gcode file has been updated to move the seam to the back, making the face look better :)