The Frosty
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An award for those who deserve a cold one.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
The Frosty
An award for those who deserve a cold one.
---
Parts List
Here are all the parts for the award. I've included the filament color and type next to each part, along with what layer I switched filament colors at.
- Napkin.stl - White/Gray - PLA (Switched filament colors at layer 17)
- Mug.stl - Transparent - PETG
- Bubbles.stl - Transparent - PETG
- Beer.stl - Gold - PETG
---
Instructions
Print the following parts (Beer.stl, Mug.stl) in vase mode, here are the settings that I used to get a good print:
- Layer Height: 0.2mm (First Layer 0.24)
- Perimeters: 1
- Top Layers: 0 / Bottom Layers: 4
I went slow and used the fan at 100%.
Print Bubbles.stl and Napkin.stl with the same print settings:
- Layer Height: 0.2mm (First Layer 0.24)
- Perimeters: 3
- Top Layers: 5 / Bottom Layers: 4
- Infill: 15%
Once everything is printed, the Beer should slide tightly into the Mug. Next, use superglue to glue the bubbles onto the Beer and the Mug onto the Napkin.
Enjoy!