Briggs and Stratton Brute Pressure Washer Gas Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a Briggs Brute 3400psi pressure washer with a 3 prong gas cap and the prongs broke the first month I owned it.…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a Briggs Brute 3400psi pressure washer with a 3 prong gas cap and the prongs broke the first month I owned it. I have never been able to find the correct cap, so I finally printed one. It is a snug fit. If you want a gasket type seal, I thought about printing the handle in 100% solid TPU. I would print the handle 100% solid not matter what material as the rig of the gas tank puts pressure on the top handle.
5mm tapered head screw 16mm to secure the 2 parts.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.30
Infill:
100%
Filament: Overture PETG Post-Printing =============
Category: Parts