Arduino Nicla Vision Enclosure & Stand v2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple enclosure & stand to use during prototyping to avoid handling exposed pins and other conductive elements
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 161
- Wydruki
- 0
- Wyświetlenia
- 960
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 3/19: needed a taller structure. It was faster & easier to do an extension “stick” and a coupler. Plus, this way, several extensions can be used if desired. Also added an optional cable holder in the coupler.
Simple enclosure & stand to use during prototyping to avoid handling exposed pins and other conductive elements including handling the microUSB connector.
I use it during Edge Impulse & OpenMV tutorials, so access to the microphone, RGB LED, TOF sensor and of course, the camera, are essential. Also, an external and easy access to the reset button to enter bootload mode when changing from MicroPython (OpenMV) to Arduino C++ (Edge Impulse)
Started from scratch after my previous iteration https://www.printables.com/model/420759-enclosure-for-arduino-nicla-vision when I discovered the original STEP file from Arduino for the Nicla Vision, which allowed for tighter tolerances and better exposure of elements.