Magnetic coupler for Voron 2.4 fume extraction
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Voron 2.4 / 60mm fan fume extraction for use with magnetic couplers.
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 149
- Wydruki
- 4
- Wyświetlenia
- 1991
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This coupler attaches to the back of the chamber exhaust fan of a Voron 2.4 (or any printer that has a similar 60mm exhaust fan setup). It replaces the stock 60mm fan guard. Use longer bolts that feed through the adapter, through the fan, and into the filter housing on the back of the Voron.
I use this setup to create a slight negative pressure to extract ABS fumes, and allows the chamber-temperature-fan to operate. I use this as part of my fume extraction setup.
Needs 6x 6x3mm and superglue to attach them. Pay attention to polarity!
Print one coupler, and one lockring. The lockring slides over the magnetic adapter, and helps the hose to stay attached (the magnets alone are likely not sufficient, though they are still recommended in order to maintain a seal).
Printed in PETG on a MK3S. You can print this in ABS too, but verify that it still fits due to normal ABS shrinkage.