Headless guitar tuning peg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tired of shredding your picks up turning your headless guitar tuners? Try this
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
So I got a headless guitar recently, that has these tuning pegs on the bridge that are just slightly too awkward to turn with your bare fingers. They have some slots cut in that allow you to turn them with a guitar pick, but most picks I have are either too weak, or too thick to fit and turn the pegs reliably. This thing is about the size of a guitar pick but has a proper 6-point key on the end to turn the tuners nice and easy! Prints in about 28 minutes on an Ender 3v2 and uses about 2g of filament with 100% infill.