Clamp with 3/4" NPT threads for Loc-Line adapter hard wired
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix with 3/4" NPT female threads for Loc-Line adapter, wiring hard wired.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 681
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU General Public License v3.0
Remixed the clamp portion to have 3/4" female NTP threads so I can use it with an NTP Loc-Line base. More tricky to setup since you need to run the wire through the hole at the base before soldering it together. I also used some adhesive backed cork sheet to give it more grip on my table.
I used this to assemble the Adam Savage Workbench Light:
Source in Onshape here: https://cad.onshape.com/documents/b81a374d9e24a3182e1658d4/w/f386df9a7f0c782b09d27337/e/00433bfc35cb526e56baa2a2?renderMode=0&uiState=6416a6680cd3c9725a5be576
I made another remix with a larger hole that doesn't require you to hardwire / solder the wire through the base, and instead using a 90 degree barrel plug adapter. Link here: https://www.printables.com/model/733748-clamp-with-34-npt-threads-for-loc-line-adapter