Couch Puzzle Box MOVED TO MY MINI FACTORY ONLY NO FILES HERE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Edit: THIS MODEL HAS BEEN MOVED FROM THIS SITE It can no only be found here: mmf.io/o/138678
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 1904
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution
Edit: THIS MODEL HAS BEEN MOVED FROM THIS SITE
It can no only be found here:
mmf.io/o/138678
---------------
This couch shaped puzzle box is a 10 piece puzzle box. It's a fairly easy print with only a few supports needed.
Assembly doc and solution video and doc below. There is a tolerance test print included in the files. (They should fit together enough to move)
Assembly Instructions:
https://docs.google.com/document/d/1DgIZGCO_V3mSPxKcuzWERLBkMVjhK-2h7hyDEmEE4JY/edit?usp=sharing
Solution Instructions:
https://docs.google.com/document/d/11bBf2fozzo7lVhbE14RS5D4-p1sgyhX-tp7WHCsCih4/edit?usp=sharing
Solution Video:
Print instructions
Rafts:
No
Supports:
Yes
Resolution:
The lower the better. I used 0.10mm for the smaller pieces and 0.15mm for the bigger ones
Infill:
15%
A little bit of glue is needed to assemble it. Make sure to print the test tolerance print included in the files before printing. Use the horizontal expansion settings in Cura to make it fit tighter or looser. It should fit so it can slide on its own but only by a little.