Support for a spot welder controller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A built a supporting part to hold the two controller boards of a spot welder on top of the microwave oven transformer.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A built a supporting part to hold the two controller boards of a spot welder on top of the microwave oven transformer.
Y used four 35mm long M3 screws to keep them in place. Some hot glue can be used to glue to frame to the transformer.
Some more details on my blog entry: https://fightpc.blogspot.com/2020/01/spot-welder.html
Print instructions
Category: Electronics Summary
A built a supporting part to hold the two controller boards of a spot welder on top of the microwave oven transformer.
Y used four 35mm long M3 screws to keep them in place. Some hot glue can be used to glue to frame to the transformer.
Some more details on my blog entry: https://fightpc.blogspot.com/2020/01/spot-welder.html