Rackmount for Orange Pi Zero
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Krapozok imagined a system of mounting brackets for mounting Raspberry Pi in a 19" rack using existing hardware.This…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 475
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- BSD License
Krapozok imagined a system of mounting brackets for mounting Raspberry Pi in a 19" rack using existing hardware. This thing allow mounting an Orange Pi Zero in the same fashion (see Krapozok's https://www.thingiverse.com/thing:1793758 for info on the hardware on which this is to be mounted).
Like in tkramm's version (https://www.thingiverse.com/thing:2759317), this mounting bracket is in two separate parts (face-plate and board support).
NB: on the "in situ" picture, this thing is on the left; On the right is the version for Orange Pi R1 (https://www.printables.com/model/427623-rackmount-for-orange-pi-r1).
Print Settings
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Notes:
Print one of each part.
I printed this in PETG using 30% infill (3D honeycomp) and 4 perimeters but those are my personal default settings.
Post-Printing
Use (up to) four M2.5x8mm screws to attach Orange Pi Zero to the "support" part and two M3x12mm screws to attach face-plate (shorter screws may work too).
Category: Computer