Marui Hunter/Galaxy Front Body mount support reinforcement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this to reinforce the front body mount support in the Marui Hunter/Galaxy chassis, as it happens this one…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed this to reinforce the front body mount support in the Marui Hunter/Galaxy chassis, as it happens this one breaks.
Simple fix, glue the broken part and put the printed part around. You may even fill to replace the broken part if you don't have and drill after to put the body post in place (in the picture, the sample is in PLA to check the dimensions. I would rather print this in PETG).
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
200
Infill:
50
Filament: PolyMaker PETG black
Category: R/C Vehicles