1 / 10
Slim Monitor Stand - Universal - Height and Angle Adjustment — zdjęcie 1
1 / 10

Slim Monitor Stand - Universal - Height and Angle Adjustment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple, strong and slim universal monitor stand (Vesa 75) with height and angle adjustment. SAVE SPACE IN YOUR DESK!

Ocena
0 / 5
Polubienia
15
Pobrania
67
Wydruki
0
Wyświetlenia
868
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial

I bought a cheap Samsung monitor that didn't had a feet, so I designed this simple, ergonomic but strong stand that took minimal space on my desk. 

The stand is made of a couple different parts that allow it to have 7 different height settings and also the design allows for angle adjustment.

The lower part is fixed to the table with 4 or 6 screws (4 screws is enough) directly to the table, then a squared printed pieces locks the lower and upper part at the designed height).

The upper part has a “cog” design which allows you to effectively lock it at the desired angle. Then use a screw and nut or a heated insert to lock it in place. Due to this design, it allows to use it even with heavy monitors (compared to just friction angle adjustment).

The adapter of the monitor is universal VESA 75. If you have need for a VESA 100 this can be easily changed, but if you can't change it let me know and I'll happily design it.

For the height adjustment lock you can either just print the lock and use it normally, or if you want to print the 2 nuts on the sides to make sure it stays locked in place, you can also do, but it's not critical.

If you have any functional question let me know.

Tagi