Replacement Pullup Bar Grips (1 Inch Diameter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement pullup bar grips and padding.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 506
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
The foam grips that came with my doorframe pullup bar deteriorated pretty quickly after buying it so I decided to use it as my first 3D modeling project.
These photos are from after about a year of active use. So, they held up pretty well long term but if you don't have any calluses they are a bit uncomfortable to use and dig into your hands.
If I were to print the padding again, I would not use any top or bottom walls because they were the first things to fall apart.
Print Settings:
Material: TPU
Supports: NO
Layer height: .2 (or whatever detail you want)
Infill: 5% on the grips and stopper, 25-30% on the padding