1 / 6
Sovol SV04 mount for BIQU H2v2s Lite extruder + dual 5015 fans
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace the original extruders with h2 lite. and add 2 5015 fans on each extruder.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 1353
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 10)Remiksy (0)Kolekcje (22)Powiązane
You don need additional mounting hardware, the screws provided with new extruder are enough but you will need to shorten the ones for the front fan mount (or use shorter ones)
With this you gain a little more bed space(309mm in x, 308mm in Y)
Print settings i used:
Material: PETG+CF
Layer hight: 0.12
Walls: 4
Top/Bottom: 4/4
Ironing: Yes/Only top layer
Infill: 30%
Supports: Yes
