Apollo LUT Cable Trays
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cable trays that go vertically up the tower and then branch out horizontally, hanging from the underside of the floors.
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 388
- Wydruki
- 0
- Wyświetlenia
- 824
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
This consists of the vertical and horizontal cable trays of the Apollo . These are part of the larger Apollo Umbilical Tower model.
As each floor is added, the horizontal cable trays as well as the lights should be added to the underside before gluing the floor on.
These cable trays are fairly complicated. You should reference the MicroArtwork drawings and the spreadsheets I provided to understand how these cable trays are mounted.
Notice that when adding these parts, some parts are the same from level to level. Higher levels may use parts from lower levels. Use the master LUTPartsList spreadsheet to determine what parts are used for each level.
Updates:
- 4/27/25 - Updated part L30 CT7-8 to be a mirror image.
- 5/10/25 - Updated part L30 C10.