Torsen Differential Type 2 model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple to print type 2 Torsen differential. Only 3x bolts needed.
- Ocena
- 5 / 5
- Polubienia
- 96
- Pobrania
- 567
- Wydruki
- 4
- Wyświetlenia
- 4048
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of very nice model by Idlebear. After struggling with getting bolts (long) to fit the original model, I remixed it to make it possible to assemble with only 3x M3x25 bolts. The axles were changed to be a part of the print. The gears have not been changed, only the differential carrier.
To make this, the following is necessary:
- Print the two halves of the carrier
- Print 3x right planet gears
- Print 3x left planet gears
- Print left and right drive gear
- Print main drive gear
- Print frame and spacer
- Print handle and nut
Can be printed without supports.
Depending on the slicer/printer, the left/right drive gear may need supports (I did not use supports).
The base of this model is rather simple and not so good. I've made a remix that fixes that here: Base for Torsen Differential.