1 / 3
Canon EF and Sony E lens and body cap mount for strap — zdjęcie 1
1 / 3

Canon EF and Sony E lens and body cap mount for strap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Probably only recommended for use with pancakes, especially if using PLA! Will print soon and receive my new pancake…

Ocena
0 / 5
Polubienia
7
Pobrania
75
Wydruki
0
Wyświetlenia
906
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

Probably only recommended for use with pancakes, especially if using PLA! Will print soon and receive my new pancake lens this week, after which I will test.

I frankensteined the linked thing and this: https://www.thingiverse.com/thing:2999719

Edit 4/8/21:

I recreated it with better methods, added gripping texture. It's tighter than the original, but I believe over time it will break in. I also made one for Sony E mount using an existing rear cap on here. It hasn't been tested because I don't own a Sony (it will eventually be tested by a friend after we're vaccinated). If you print and test, let me know if it's a snug and sturdy fit.

Edit 4/6/21:

Printed, went ahead and tried it out with my kit lens, and while it's a bit unwieldy with this longer lens (and being a zoom lens, it's awkward to put on/take off without accidentally twisting the zoom cylinder instead of the main body), but it seems really sturdy! Bonus - I didn't even think about it, but it's a perfect holder for the body cap! Duh! Changing the title to reflect this. Also, I'm probably going to fix the sloppiness with how I put these two things together (there are empty spots in the body). Print Settings ==============

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

200

Infill:

20

Filament: Overture PLA Black

Category: Camera

Tagi