1 / 3
Flying Submarine
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This craft, based on the V-22 osprey, was designed to both fly, swim, and transition between the two mediums.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 979
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
THIS IS A COMPLETELY EXPERIMENTAL MODEL
This design is based on the V-22 osprey and its tilt rotors. I recommend you use two EDFs and two servos to replicate the tilt rotor. I used two 80mm EDFs and their recommended ESCs. I printed with PLA and around 20% infill.
You need two rudders, elevator flaps, and each type of motor mount.