1 / 2
High acceleration belt tensioners for AC Vyper / CR6se — zdjęcie 1
1 / 2

High acceleration belt tensioners for AC Vyper / CR6se

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a complete set of 3d printable tensioners for Anycubic Vyper or Creality CR6 SE.

Ocena
4 / 5
Polubienia
19
Pobrania
156
Wydruki
2
Wyświetlenia
1086
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I got fed up with existing tensioners for my printer and made these ones from scratch. 

You're gonna need four M5 bolts, two for the tensioners and two for mounting the Y tensioner.
The required length is anywhere from 1 to 2cm, depending on how you long your belts are. The two bolts for the Y tensioner mounting should be 15mm long.

You also are going to need two M5 T-nuts to screw into, any should be fine.

the belt idlers used here are 8mm wide 15mm in diameter ones, on 3mm shafts. Stock ones are wider and WILL NOT FIT. Get some metal ones, the stock ones are plastic. 

ABS/PETG recommended for all parts. Or at least the small idler holders. The outer bodies should be fine with PLA. 

Happy hacking!

Tagi