1 / 1
MST MRX GT Rear ESC Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rear ESC Mount for MST MRX GT
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 562
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Rear ESC Mount for the MST MRX GT drift chassis.
Mounts to the factory location on the aluminum rear gear cover with spare hardware from the build kit. Printed in ASA with 100% infill on my Bambu Lab Carbon X1, it has held up through many hours testing (aka bad driving) . Suggested print orientation with short side of the L on the bed to prioritize strength around the screw hole.