Handle for angle grinder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement handle for angle grinder
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 417
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A replacement handle for angle grinder which has M8 connection to the handle. The bolt is locked in place by the handle design.
In my angle grinder the brand sign has worn out, but this type of connection for the handle is very common between different brands and sizes. The original handle broke totally into small pieces. Time had done it's duty :). Now the angle grinder had a second life, because it still worked technically ok.
Printed in PETG with 0,2mm layer height and 15% infill. Took 5h to print. I printed the handle in vertical position (picture where hand is shown), to limit the amount of support material needed.