1 / 1
PowerPole mount in place of 15Amp snap-in plug
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sometimes things have to be modified
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Needed a way to mount some PowerPole connectors in a Vtoman LiFePO 4 power station, didn't need all the 15amp outlets, so designed this part to hold a PowerPole in place of where the outlet would go.
Secure the PowerPole connector in this plug by using a M3*6mm screw
Simply use a knife to cut the through the narrow part where the back clips meet the inside face of this plug, this lets the plug snap-in and the back clips hold it in place.
Printed with PETG for strength