1 / 3
Cable Mount (Ziptie Anchor) Round 25mm, With M3 Screwhole — zdjęcie 1
1 / 3

Cable Mount (Ziptie Anchor) Round 25mm, With M3 Screwhole

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I am learning with a new Cad-Program. This Cable Mount was created in a Learning-Session with my tutor.

Ocena
5 / 5
Polubienia
9
Pobrania
96
Wydruki
2
Wyświetlenia
483
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I am learning with a new Cad-Program.
This Cable Mount was created in a Learning-Session with my tutor.

The diameter is 25mm. The Hole for the Screw is for a M3 (ISO 2009-M3x10-4.8)

When my enclosure for the Printer is done, i'll add a photo of a printed part.

The Step file is added and a 3d-PDF.

Print instructions

Category: Office Summary

I am learning with a new Cad-Program.
This Cable Mount was created in a Learning-Session with my tutor.

The diameter is 25mm. The Hole for the Screw is for a M3 (ISO 2009-M3x10-4.8)

When my enclosure for the Printer is done, i'll add a photo of a printed part.

The Step file is added and a 3d-PDF.

Print Settings

Printer Brand: RepRap

Printer: Original Prusa i3 MK2

Rafts: Doesn't Matter

Supports: Doesn't Matter

Resolution: 0.2

Infill: 10%

Notes:

If you have problems with bridging, add supprt.

Tagi