Metric drill bit diameter gauge for 2 to 5mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick way to determine the approximate diameter of drill bits or other similar tools for diameters from 2 to 5mm
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
A simple gauge to determine drill bit diameters between 2 & 5mm. While it is normally easy to see the drill bit size with just visual inspection, it becomes more difficult when incremental sizes are frequently used (e.g. 2.5mm, 3.2mm, 3.3mm etc). Hence this gauge is slotted for each size drill bit from 2 to 5mm. Each slot starts at 0.1mm smaller and goes up to 0.9mm higher. So, 2mm slot is from 1.9mm to 2.9mm.
If the drill bit does not slide all the way to the bottom of the associated slot, it is likely to be incrementally larger. Common increments of .1, .2, .3, .5 are indicated along the slot. I have used this in my workshop and it works well for the sizes listed.
I have no difficulty printing this on my prusa mk3S using a 0.4mm nossle and PLA. It took under an hour to print.